Carli Pintop 2.5 Leveling System - Base - 2.5in Lift - 2013-18 Ram 3500 - Diesel
Sale!

Carli Pintop 2.5 Leveling System – Base – 2.5in Lift – 2013-18 Ram 3500 – Diesel

Original price was: $4,008.08.Current price is: $298.98.

SKU: 7836001075242 Category:

Description

Carli Suspension

Carli Pintop 2.5 Leveling System Base 2.5in Lift 2013–2018 Ram 3500 Diesel

The Carli Pintop 2.5 Leveling System is designed for Ram 3500 owners who want a quality big-shock suspension system with moderate lift height, improved ride quality, and confident light- to medium-duty off-road performance. This system provides a 2.5-inch front lift for a leveled stance while maintaining factory rear leaf springs to preserve load capacity, towing manners, and hauling capability.

At the heart of the system are Carli-specific, blueprinted King 2.5-inch remote reservoir shocks on all four corners. Compared to a 2.0-inch shock, the 2.5-inch shock body delivers 55% more piston surface area for improved control and performance. Carli engineers designed custom pistons and tuned the shocks in-house to optimize ride quality, handling, and predictability both on-road and off-road.

Key Features:

  • 2.5-inch front lift for a leveled stance

  • Carli linear rate front coil springs

  • Carli-specific King 2.5-inch remote reservoir shocks

  • Rear piggyback reservoir shocks tuned for factory rear leaf springs

  • Custom Carli shock pistons for proper base flow rates

  • 17-4 stainless steel shock shafts for durability and corrosion resistance

  • Adjustable track bar to recenter the axle at the taller ride height

  • Front reservoir mounts display the 9-inch remote reservoirs over the front tire

  • Maintains factory rear leaf springs, load capacity, and hauling capability

  • Improves ride quality, handling, and off-road control

  • Helps reduce front-end sloppiness that can contribute to Death Wobble

Notes:

  • Fits 2013–2018 Ram 3500 SRW and DRW diesel models.

  • Fits 2019 and newer Ram 3500 DRW diesel models only where applicable.

  • This system is not upgradeable to any other Carli Suspension system.

  • Designed for customers wanting a quality big-shock system with off-road capability, minimal lift, and no reduction in payload or hauling capacity.

  • Slight eccentric bolt compensation is recommended to correct caster after installation.

  • No radius arm drops are included.

  • Customers may experience slight front coil spring bow at the 2.5-inch lift height without radius arm drop brackets.

  • Radius arm drop brackets can be added separately to alleviate coil bow and recenter caster adjustment if needed.

  • This system will result in tight, responsive handling.

  • Carli 3-inch suspension systems will ride softer in the rear due to their included reduced-capacity rear springs.

  • Ride quality can be substantially improved with the addition of a Carli torsion sway bar.

  • A Carli low-mount steering stabilizer is recommended for any tire larger than factory size.

  • Recommended tire size is 35 inches.

  • Recommended wheel width is no more than 9 inches.

  • Recommended backspacing is 5.5 to 6 inches.

  • An 18-inch diameter wheel is recommended for optimal ride quality.

  • Recommended unloaded tire pressure is 45 PSI front and 40 PSI rear.

  • King shocks use plated steel bodies. If exposed to inclement weather for extended periods, Carli recommends wrapping the shocks in 3M film to provide a replaceable moisture barrier.

  • King shock oil is rated to -55°F.

Vehicle Fitment:

  • 2013–2023 Ram 3500 Big Horn

  • 2013–2023 Ram 3500 Laramie

  • 2014–2015 Ram 3500 Laramie Limited

  • 2013–2020 Ram 3500 Laramie Longhorn

  • 2016–2023 Ram 3500 Limited

  • 2021–2023 Ram 3500 Limited Longhorn

  • 2013–2015, 2017, 2019–2022 Ram 3500 Lone Star

  • 2013–2023 Ram 3500 SLT

  • 2013 Ram 3500 ST

  • 2013–2023 Ram 3500 Tradesman

SKU: CS-DPT25-LVL-13-D

Reviews

There are no reviews yet.

Be the first to review “Carli Pintop 2.5 Leveling System – Base – 2.5in Lift – 2013-18 Ram 3500 – Diesel”

Your email address will not be published. Required fields are marked *